Menu
The board you build cabinetry, carcasses and clinical furniture from. Co-extruded from our proprietary closed-cell polymer — waterproof the whole way through. Work it with the tools already on your bench, and water never finds a way in.
Patented W14 welded joints · Lifetime waterproof guarantee · 3–18 mm
Saw it, route it, drill it and fix it with the kit you already own. No specialist blades, no rigs to learn. It machines like a dense hardwood and holds a screw far harder than MDF.
Most cabinetry relies on a mechanical joint — and a joint is a seam, a seam is a gap, and a gap is somewhere water sits and bacteria breed. W14 chemically welds WCB panels into one monolithic piece. Try and pull it apart.
On the bench: W14 going into a carcass joint
Two solid polymer skins co-extruded with a closed-cell core — our own proprietary formulation, the same waterproof material right the way through. There is no inside for water to reach: a cut edge or a drilled hole is as waterproof as the face. Lighter than solid grade laminate, stiff under load, and it takes a fixing like the timber you already trust.
Shown at 18 mm · WCB is made from 3 mm to 18 mm
Face, cut edge or drilled hole
Mass gain on full immersion
EN 13501-1
Biomaster silver-ion · MRSA & E. coli
Versus MDF
Closed-cell polymer core
18 mm board
Visible change
Sheet stock
ISO 16000-9
Figures from the WCB material characteristics datasheet (18 mm board, EN 438-2 series). The headline is the one that matters on site: water can’t get in — the boiling-water figure is simply the lab proof sitting underneath it.
Constant humidity and daily wash-down — the carcass never swells.
Wiped down with the harsh stuff between every patient. The surface stays put.
Hosed down daily, occupied around the clock. It shrugs it off.
Fully submerged in a flood, the kitchen dries out and goes back in.